How To Install Rachio 3 Hardware ?

0
99

1. It’s simple to install the Rachio 3 Smart Sprinkler Controller. You’ll be up and running in about 15 minutes.

2. Make sure you have WiFi where you want the controller to be installed and then collect all the instruments you need.

3. You will discover the intelligent controller, guidelines, drywall anchor screws, and the power adapter in the box.

4.Rachio 3 Hardware

5. Note that the controller is not weatherproof, so you will need a weather-resistant enclosure if you want to install it outdoors.

6. Before taking down your old controller, test all the sprinkler zones.

7. Before taking down your old controller, test all the sprinkler zones are working fine.

8. Before proceeding, it is a good idea to note any areas that may need repairs.

9. Unplug the ancient controller and look at the cable.
Take an image so that the cables can be attached to the right Rachio 3 areas.

10. Unhook all now, and remove the ancient controller.

11. On the last section of the setup manual, there is a template for the screw positions.

12. Make sure the drill icon can be reached by the cables and check the level of the bottom holes.

13. Install the drywall anchors and mark the middle of each hole on the wall. Level it.

14. Install the drywall anchors and mark the middle of each hole on the wall.

15. For each anchor, drill a hole and tap it gently.

16.Anchor with a hammer.

17. To reveal the 3 mounting holes and the terminal block, remove the magnetic faceplate.

18. Hang the controller, then use your earlier reference photo to attach each zone wire to the appropriate terminal. Just raise the lever and put the wire in.

19.

20.

21. Compare it with the picture taken earlier from the controller.

22.

23. If you have one,’ M’ is the Master Pump; on your ancient controller it may have been marked’ P.’
There are the same’ C’ terminals; you can use any of them.

24.

25. Put the adapter in now.

26. You’re prepared to upgrade!
The light bar is going to flash.

27. You’re prepared to upgrade!
The light bar is going to flash. Open the app on your phone.

28. A blue pulse across the entire bar implies that your Rachio 3 is prepared for use online.Now you can customize your areas with the Rachio app, optimize your watering timetable, and more.

Also Check, Rachio 3 Wifi Sprinkler Controller

Tags ,:How To Install Rachio 3 Controller, Install Rachio 3 Outdoor Enclosure, Rachio 3 Controller Installation, Rachio 3 How To Install, Rachio 3 Install, Rachio 3 Install Guide, Rachio 3 Install Manual, Rachio 3 Install Video, Rachio 3 Installation Instructions, Rachio 3 Outdoor Enclosure Installation, Rachio 3 Outdoor Installation, Rachio Gen 3 Install